PAGE 1 OF 1

1. Measure the room and create a sketch of the hanging plan. Center a plumb line on a focal point, such as a fireplace or window, and sketch out a plan in both directions from the center line.

2. If the room doesn’t have an obvious focal point, start at the corner farthest from the entry, measure a distance equal to the width of the wall covering and mark a point. Work in both directions, marking the points where seams will fall.

3. Adjust the hanging plan for corners that fall exactly on seam lines. Make sure the wallcovering will overlap at least ½ on inside corners and t” on outside corners.

4. Adjust for seams that fall in difficult locations, such as near the edges of windows or doors. Shift the starting point so the seams leave workable widths of wallcovering around obstacles.