|
Step 2. Remove the screws from the cover plate. Pull the trip
lever and the linkage from the overflow opening. Clean off soap
and hair with a dish scrubbing brush in a basin of hot water.
Remove mineral buildup with white vinegar and a wire brush.
Lubricate moving parts of the linkage and rocker arm mechanism
with heatproof grease. |
|
Step 1. Raise the trip lever to the open position. Pull the
stopper and rocker arm assembly from the drain. Clean off soap
and hair with a dishwashing brush in a basin of hot water. Clean
off mineral deposits with a toothbrush or small wire brush and
white vinegar.
Step 3. Adjust the pop-up stopper mechanism by first loosening
the locknut on the lift rod. If the stopper doesn’t close all
the way, shorten the linkage by screwing the rod ‘ farther into
the linkage- adjusting bracket. If the stopper doesn’t open wide
enough, extend the linkage by unscrewing the rod 1/8". Tighten
the locknut before replacing the mechanism and testing your
adjustment. |
